• الصفحة الرئيسية
  • نبذة عنا
  • المنتجات
    • جميع المنتجات
    • أسطوانة هيدروليكية قياسية
    • أسطوانة هيدروليكية مخصصة حسب الطلب من OEM
    • النظام الهيدروليكي
    • ماكينة الاختبار الهيدروليكية
    • المكونات الهيدروليكية
  • الحل
    • معدات زراعية
    • معدات البناء
    • النفايات وإعادة التدوير
    • المعدات الصناعية والآلات
    • مركبات خاصة
  • الدعم
    • الأسئلة الشائعة
    • تنزيل
  • المدونة
    • الأخبار والأحداث
    • المدونة
  • اتصل بنا
  • arAR
    • en_USEN
    • ES
    • fr_FRFR
    • de_DEDE
    • pt_PTPT
    • it_ITIT
    • jaJA
    • ko_KRKO
    • رو
    • viVI
احصل على عرض أسعار




    [email protected]

    مساعدة سريعة: اتصل بأحد خبرائنا وسنتواصل معك خلال 24 ساعة!

    الرئيسية
    الحل
    المعدات الصناعية والميكانيكية
    Custom Flange Hydraulic Cylinder Solution for Glass Processing Equipment

    جدول المحتويات

    تبديل
    • معلومات المشروع
    • The Customer Challenge
    • The AISOAR Solution
      • Getting the Flange and Washer Dimensions Right
      • Addressing the Previous Surface Finishing Problems
      • Reviewing the Actual Operating Conditions
    • Manufacturing & Quality Control
    • نتائج المشروع

    Custom Flange Hydraulic Cylinder Solution for Glass Processing Equipment

    الـ 13 تشرين الثاني/نوفمبر 2026

    Custom Flange Hydraulic Cylinder Solution for Glass Processing Equipment Manufacturerمعلومات المشروع

    اسم المشروع: Flange Hydraulic Cylinder for MasterBend Magazine

    التطبيق: Glass Processing Machinery

    رمز الطلب: HSG50/60×25×200mm-49.5mm-22/25MPa

    ضغط التشغيل: 25 MPa / 250 bar

    Bore Specification: 50/60 mm

    قطر القضيب: 25 mm

    How AISOAR addressed surface finishing concerns and special mounting requirements for a MasterBend Magazine.

    The challenge went beyond matching the cylinder’s basic dimensions. A customized flange and a special washer also needed careful attention. AISOAR approached the project by reviewing the customer’s drawings, clarifying the surface finishing requirements, and developing a manufacturing solution around the customer’s actual concerns.


    The Customer Challenge

    The customer was looking for a new supplier after experiencing problems with the paint and plating thicknesses of their previous hydraulic cylinders. These quality concerns, together with wear or damage during operation, made them cautious about purchasing another replacement without reviewing the manufacturing requirements more carefully.

    The replacement also had to match a non-standard flange and specially dimensioned washer. Differences in mounting holes, threads, or washer dimensions could create installation problems, even if the main cylinder specifications were correct. The customer therefore needed a manufacturer who could address the surface finishing concerns while maintaining compatibility with the existing equipment.


    The AISOAR Solution

    After receiving the customer’s CAD drawings, AISOAR’s engineering team reviewed the cylinder design and discussed its operating conditions. The focus was on three practical areas that would determine whether the replacement could meet the customer’s requirements.

    Getting the Flange and Washer Dimensions Right

    Getting the Flange and Washer Dimensions Right

    Our engineers reviewed the flange geometry, mounting holes, thread specifications, and special washer dimensions against the customer’s drawings. The washer required particular attention because it was a customized component that needed to fit the existing flange assembly.

    Confirming these details before manufacturing helped define the critical machining dimensions and reduce the risk of installation incompatibility.

    Addressing the Previous Surface Finishing Problems

    AISOAR discussed the customer’s required paint and plating thicknesses to establish clearer manufacturing specifications. Rather than relying on standard finishing requirements, the team focused on defining the surface treatment details that mattered to the customer.

    These specifications provided a basis for production and inspection, helping address one of the customer’s main concerns when selecting a new supplier.

    Reviewing the Actual Operating Conditions

    Beyond the mounting dimensions and surface finish, our team discussed the cylinder’s operating environment, including whether special working temperatures needed to be considered. This information was relevant to reviewing material suitability, sealing requirements, and the specified working pressure.

    By considering these factors together, AISOAR confirmed the feasibility of manufacturing the customized cylinder according to the customer’s drawings and application requirements.


    Manufacturing & Quality Control

    With the technical requirements established, the next priority was ensuring that the manufacturing and inspection process addressed the agreed specifications. Critical mounting dimensions, including the flange, threads, and special washer, were identified for dimensional verification, while paint and plating thickness requirements provided a reference for surface finishing inspection.

    The customer also requested pressure and leakage testing before shipment. These checks were included in the quality verification requirements to assess pressure integrity and identify potential sealing issues before delivery.

    The project photographs show the completed hydraulic cylinders arranged together after manufacturing, providing a view of the finished components and their flange mounting configuration.

    Custom Flange Hydraulic Cylinder Solution for Glass Processing Equipment


    نتائج المشروع

    Through technical discussions and CAD drawing reviews, AISOAR confirmed the feasibility of manufacturing the customized flange hydraulic cylinder. The agreed manufacturing requirements addressed the customer’s main concerns, including flange compatibility, special washer dimensions, painting and plating specifications, operating conditions, and pre-shipment pressure and leakage testing.

    What began as a search for a replacement supplier developed into a more detailed engineering review of the issues affecting the customer’s existing cylinders. Rather than offering a replacement based only on standard dimensions, AISOAR helped establish a manufacturing solution that considered both installation compatibility and the customer’s quality expectations.

    The project illustrates an important point for equipment manufacturers: effective hydraulic cylinder customization is not always about changing the entire design. Sometimes, it is about identifying the critical details, understanding why they matter, and ensuring they are properly addressed before manufacturing begins.

    Custom Flange Hydraulic Cylinder for Glass Processing Equipment

     

    المنتجات الموصى بها

    أسطوانة هيدروليكية مخصصة لقضيب الربط

    جميع المنتجات, أسطوانة هيدروليكية مخصصة حسب الطلب من OEM

    الاسطوانات الهيدروليكية الملحومة المصنعة للمعدات الأصلية المخصصة

    جميع المنتجات, أسطوانة هيدروليكية مخصصة حسب الطلب من OEM

    الأسطوانات الهيدروليكية الزراعية

    جميع المنتجات, أسطوانة هيدروليكية قياسية

    التطبيقات

    حلّ باستخدام أسطوانة هيدروليكية لآلة تقطيع الخشب

    أسطوانة هيدروليكية لآلة تقطيع الخشب

    ما هي أنواع الأسطوانات الهيدروليكية المستخدمة في آلات الحصاد؟

    احصل على عرض الأسعار الآن


      الشركة

      قصر هنغشين، رقم 588، طريق جيانغنان الرئيسي، شارع تشانغهي، منطقة بينجيانغ، مدينة هانغتشو، مقاطعة تشجيانغ، الصين

      جهات الاتصال لدينا

      +86-571-87920309
      [email protected]

      تابعنا

      فيسبوك
      انستقرام
      لينكد إن

      المنتجات الرئيسية

      • أسطوانة هيدروليكية قياسية
      • أسطوانة هيدروليكية مخصصة حسب الطلب من OEM
      • النظام الهيدروليكي
      • ماكينة الاختبار الهيدروليكية
      • المكونات الهيدروليكية

      أيسوار © 2026. جميع الحقوق محفوظة.

      واتساب
      البريد الإلكتروني
      يستخدم هذا الموقع الإلكتروني ملفات تعريف الارتباط لتحسين تجربتك. إذا واصلت استخدام هذا الموقع، فأنت توافق على ذلك. سياسة الخصوصية